1980 Ford F 250 Leaf Spring Assembly Parts

Choose your Engine for your 1980 Ford F-250

6 Cyl 4.9L 8 Cyl 5.0L 8 Cyl 5.8L 8 Cyl 6.6L

Showing 1 - 8 of 8 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1980 Ford F-250 Leaf Spring Assembly - Front 6 Cyl 4.9L Skyjacker

SOFTRIDE SPRING 6IN. FRT FORD
Lift Height 5-6 in.; Single
SOFTRIDE SPRING 6in. FRT FORD
Softride Leaf Spring
Product Attributes:
- Lift/Drop Height:
  - 5 In.
  - 5.5 In.
  - 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1980 - Ford F-250	L	4917	Front	6 Cyl 4.9L	4WD	300

5 In Stock

$489.54 CAD

$587.45 CAD

Brand	Skyjacker
Part #	S97F860S
Condition	New
Warehouse	B

1980 Ford F-250 Leaf Spring Assembly - Rear 6 Cyl 4.9L Skyjacker

SOFTRIDE SPRG 6IN. REAR FORD
Lift Height 5-8 in.; Single Factory Block Can Be Removed On 4WD To Reduce Lift 2 in.
4in.F250;6in.F150;8in.BRO;RR SPRG
Softride Leaf Spring
Product Attributes:
- Lift/Drop Height:
  - 5 In.
  - 5.5 In.
  - 6 In.
  - 7 In.
  - 8 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1980 - Ford F-250	L	4917	Rear	6 Cyl 4.9L	4WD	300

10 In Stock

$549.25 CAD

$659.10 CAD

Brand	Skyjacker
Part #	S97FR56S
Condition	New
Warehouse	B

1980 Ford F-250 Leaf Spring Assembly - Front 6 Cyl 4.9L Skyjacker

SOFTRIDE SPRING 4IN. FRT FORD
Lift Height 3-4 in.; Single
SOFTRIDE SPRING 4in. FRT FORD
Softride Leaf Spring
Product Attributes:
- Lift/Drop Height:
  - 3 In.
  - 3.5 In.
  - 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1980 - Ford F-250	L	4917	Front	6 Cyl 4.9L	4WD	300

5 In Stock

$477.14 CAD

$572.57 CAD

Brand	Skyjacker
Part #	S97F840S
Condition	New
Warehouse	B

1980 Ford F-250 Leaf Spring Assembly - Rear 6 Cyl 4.9L Skyjacker

SOFTRIDE SPRG 4IN. REAR FORD
Lift Height 3-6 in.; Single Factory Block Can Be Removed On 4WD To Reduce Lift 2 in.
2in.F250;4in.F150;6in.BRO RR SPRG
Softride Leaf Spring
Product Attributes:
- Lift/Drop Height:
  - 3 In.
  - 3.5 In.
  - 4 In.
  - 4.5 In.
  - 5 In.
  - 5.5 In.
  - 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1980 - Ford F-250	L	4917	Rear	6 Cyl 4.9L	4WD	300

11 In Stock

$499.49 CAD

$599.39 CAD

Brand	Skyjacker
Part #	S97FR54S
Condition	New
Warehouse	B

1980 Ford F-250 Leaf Spring Assembly - Rear 6 Cyl 4.9L Skyjacker

4IN. F150; 250-6IN. BRO 2STG RR SP
Lift Height 6 in.; Pair Factory Block Can Be Removed On 4WD To Reduce Lift 2 in.
4in.F150;250-6in.BRO 2STG RR SP
Softride Leaf Spring
Product Attributes:
- Lift/Drop Height: 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
Skyjacker Softride Technology enhances every steely aspect of spring performance, giving you all the vigorous off-road handling needed while providing the smooth street riding characteristics that you demand. Skyjacker Softride springs use only American steel. Skyjacker Softride Springs use bolt style spring clips, which eliminate friction.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1980 - Ford F-250	L	4917	Rear	6 Cyl 4.9L	4WD	300

3 In Stock

$998.99 CAD

$1,198.79 CAD

Brand	Skyjacker
Part #	S97FR54
Condition	New
Warehouse	B

1980 Ford F-250 Leaf Spring Assembly - Rear 6 Cyl 4.9L Skyjacker

FITTED LEAFS FOR FR54; PR
Lift Height 3-4 in. Or 6 in.; For Use w/PN[FR54] Softride Leaf Spring; Pair
FITTED LEAFS FOR FR54;PR
Fitted Leaf
Product Attributes:
- Lift/Drop Height:
  - 3 In.
  - 3.5 In.
  - 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
Fitted Leafs are designed as an option Exclusively for Skyjacker(R)Softride(R) Lifted Leaf Springs. These are used when the additional weight of aftermarket accessories are installed such as a heavy w in. bumper, swing tire carrier, or all your extra gear.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1980 - Ford F-250	L	4917	Rear	6 Cyl 4.9L	4WD	300

1 In Stock

$272.94 CAD

$327.53 CAD

Brand	Skyjacker
Part #	FLFR54
Condition	New
Warehouse	C

1980 Ford F-250 Leaf Spring Assembly - Front 6 Cyl 4.9L Tuff Country

2.5 Inch Add-A-Leaf Spring
2.5 in. For Vehicles w/4 Mounting Holes In Axle Pivot Brackets
2.5 Inch Add-A-Leaf Spring
Leaf Pack
Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
Features:
- Leaf Pack
- Added to Existing Front Leaf Springs
- Lifts Truck Without Created a Harsh Ride
Tuff Country EZ-Ride Suspension was incorporated over 20 years ago realizing the desperate need for quality suspension products in the after market world. As well as supplying the 4WD enthusiast with the best quality, Tuff Country EZ-Ride Suspension also offers you the most competitive price structure in the industry. Tuff Country EZ-Ride Suspension opened its doors in July of 1988 in a small 1000 square foot facility. We have now expanded into a new 53,000 square foot high tech facility nestled at the bottom of the beautiful Rocky Mountains in Salt Lake City, Utah. Tuff Country EZ-Ride Suspension utilizes the transverse terrain of the Rocky Mountains and the rugged terrain of Utahs southeast desert near Moab Utah as its testing grounds. All brackets are made from high quality top grade steel and cut to precise dimensions by a state of the art computerized laser beam. What does this mean for you? It means every bracket is made the same and will allow a proper fit.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Drive Type	CID
1980 - Ford F-250	L	4917	Front	6 Cyl 4.9L	4WD	300

Brand	Tuff Country
Part #	82200
Condition	New
Warehouse	C

1980 Ford F-250 Leaf Spring Assembly - Front Rough Country

4 in.; 53.5 in. Length; 6.5 in. Uncompressed Arch; 24.375 in. Uncompressed Half Length
Leaf Spring; Front; 4 in.; 53.5 in. Length; 6.5 in. Uncompressed Arch; 24.375 in. Uncompressed Half Length;
Leaf Spring
Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: No
Features:
- Easy Bolt-On Installation
- Bushings Included
- Sold As A Pair
Added Lift Height and Ride Comfort. Take your suspension kit to the next level with Rough Country's Replacement Leaf Springs. Constructed from high-quality materials and designed specifically for the weight of your vehicle. This enhanced replacement spring will provide a factory-like feel while retaining your suspension lift height. Durable and Off-Road Ready. Rough Country's Replacement Leaf Springs are designed to tackle any terrain that they are faced with. Featuring a multi-leaf design and spring pads this reduces the friction and maximizes comfort. Each leaf pack utilizes tapered leaves for improved flexibility at their ends. Installation. Rough Country's Replacement Leaf Springs offer a 100% bolt-on installation estimated to take approximately 1-2 hours depending on vehicle condition. Simply remove the pre-existing leaf spring and use the stock hardware to equip your vehicle with this high-quality replacement. Lifetime Replacement Warranty. Rough Country's Replacement Leaf is backed with a 5-year replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Country's Suspension products!